Posted by Bill Litwin on Fri, Apr 09, 2010 @ 11:15 AM
Emergency spill response to reactive or other hazardous and explosive liquid spills creates a situation that must be responded to quickly and easily. PetroGuard solidifying hyper-immobilizing absorbent is the ideal product to use with vapor suppressing foam products. Most water based foams will initiate a cloud of acid vapor when applied to reactive chemicals. This can be avoided if the spilled chemical is first treated with PetroGuard and then blanketed with Universal Gold. The PetroGuard will instantly solidify the liquid chemical or other hydrocarbon locking the material at the molecular level without creating a chemical reaction, because the process is physical not chemical.
National Fire Protection Association NFPA 11 Standard for Low, Medium, High expansion foams, Chapter 5, Section 5.2.4.3.1 " Water-soluble and certain flammable and combustible liquids and polar solvents that are destructive to regular (non alcohol-resistant) foams shall use alcohol-resistant foams."
Many of our customers are successfully using PetroGuard and foam this way when responding to reactive chemical spills, and have made it part of their company response plans. EHS professionals and response personnel are encouraged to consider this combination as a way to simplify spill response methods and prevent or minimize accidental release of toxic vapors.
Please Contact us for more information.
Posted by Bill Litwin on Thu, Mar 25, 2010 @ 09:45 AM
When responding to hazardous chemical and oil spills, using conventional absorbents just doesn't do the trick. PetroGuard on the other hand will lock up the spill, prevent further migration, drastically reduce or eliminate vapor production and allow you to pick up the chemical or oil easily and quickly as solid. This holds true for a water or land environment. Cost to absorb and solidify a gallon of hazardous liquid chemical is about $3.50.
Disposal is cheap and safe, costing an average of about $375 for a 55 gallon drum of treated chemicals weighing approximately 400 lbs. Incineration is the recommended way since it is cleaner and more environmentally friendly than landfilling.
PetroGuard your spills, don't just absorb them!
Posted by Bill Litwin on Tue, Jan 26, 2010 @ 09:18 AM
The Port Arthur Texas oil spill cleanup operations are being carried out in the traditional method of using containment booms and oil skimmers. While this is an accepted methodology, there is a technology available that would greatly enhance the cleanup results and truly remove the floating oil and sheens from the water surface without the use of surfactants (detergents). This technique is classified as "Advanced Absorption Technology" and the commercial product that is most appropriate is PetroLite for oil spills. Containment booms and skimmers are not 100% effective in capturing floating oil. Alternatively, PetroLite will instantly immobilize and solidify any floating oil that is comes in contact with. Any further ecological damage is thereby prevented, cleanup operations are greatly simplified and associated cost savings become very apparent. PetroLite is listed by the USEPA as appropriate for use on water or land. Cleanup contractors and the U.S. Coast Guard and the Texas General Land Office should have a keen interest in this technology.
For more information, contact Guardian Environmental Technologies here.
View video demonstration of PetroLite used on crude oil spills on water.
Posted by Bill Litwin on Mon, Nov 30, 2009 @ 04:41 PM
Unfortunately, many companies still respond to chemical spills using mineral products or sand. While these products are inexpensive, they are also ineffective in actually absorbing the liquid. 
Sand will only cause the liquid to cling to the surface of the grains, creating another problem of disposing of the sand (weight and bulk), possibly contaminating the responder or creating a pollution problem. Instead, look for a product that:
- absorbs
- immobilizes
- permanently solidifies the oil or chemical
Advanced Absorption Technology will allow first responders to quickly and permantly immobilize a chemical spill, transform the liquid into a solid thereby enhancing efficiency of the cleanup operation, as well as reducing the risk to the responders.